KA BUILDING PRODUCTS
Advanced Cornish Made Building Chemicals
Help Line 7 days a week
+44 1872 879011
KA Tanking Slurry
Grey & White
Crystalline waterproofing slurry with radon resistance, WRAS potable water approved.
for masonry, blockwork, basements & potable water tanks.
Application List
A comprehensive list of environments, structures and use-cases where KA Tanking Slurry™ is suitable:
Domestic & Residential Waterproofing
- Basements
- Cellars
- Utility rooms
- Wet rooms
- Shower areas
- Laundry rooms
- Outbuildings
- Garages
- Garden rooms
- Damp masonry prior to plastering
- Floors prior to levelling compound
- Under-tile waterproofing on concrete substrates
Structural & Below-Ground Waterproofing
- Retaining walls
- Lift shafts / lift pits
- Foundations
- Raft slabs
- Concrete walls below ground level
- Underground service rooms
- Plant rooms
- Pump rooms
- Sumps and drainage chambers
- Tunnel walls
- Underpasses
- Culverts
- Concrete bunds
- Water-bearing blockwork
- Negative-pressure waterproofing
- Positive-pressure waterproofing
Commercial & Industrial Applications
- Warehouse foundations
- Industrial basements
- Service ducts
- Utility tunnels
- Water treatment facilities
- Concrete tanks
- Silos and containment structures
- Commercial plant pits
- Underground storage areas
- Car park retaining walls
- Lift motor rooms
- Concrete bunds for storage
Water-Holding Structures
- Garden ponds, concrete or rendered
- Koi ponds
- Wildlife ponds
- Water features
- Fountains
- Ornamental pools
- Concrete fish tanks
- Water troughs
- Irrigation tanks
- Agricultural water storage
- Livestock drinking tanks
-
Permanent crystalline waterproofing
-
Stops water ingress on positive & negative pressure
-
Ideal for basements, lift pits, retaining walls, cellars
-
Safe for drinking water tanks
-
Compatible with KA Fillet Seal & KA Super Plug
-
Tested to BS 6920, BS 3921, BS EN 12390‑8
-
Radon‑resistant barrier
-
Easy brush application
- Swimming pool shells before tiling
- Spa pools
- Hydrotherapy pools
- Plunge pools
- Commercial pool basements
- Balance tanks
- Pool plant rooms
- Poolside retaining walls
Potable-Water & Hygienic Applications
- Drinking-water tanks
- Potable-water storage chambers
- Food-safe water reservoirs
- Water purification plant structures
- Clean-water sumps
- Water cisterns
- Concrete water channels
-
Installation Protocol
Preparation: Remove existing finishes, clean thoroughly, and ensure the surface is damp.
Mixing: Stir the powder into water at a 3:1 ratio until a smooth consistency is achieved.
First Coat: Brush the slurry onto the pre-wetted wall or floor carefully.
Second Coat: Apply crosswise over the initial layer once it has started to set.
Coverage: Each unit treats roughly 8m² via a two-coat process.
Curing: Ensure even drying.
Swimming Pool & Leisure Applications
WRAS BS 6920:2002 approved.
Gas-Tight & Radon-Resistant Applications
- Radon-resistant waterproofing layers
- Below-ground rooms in radon zones
- Radon-mitigation coatings on concrete
- Gas-tight sealing of blockwork
- Sub-slab radon protection systems
Remedial & Repair Applications
- Damp walls
- Leaking masonry
- Failed waterproofing systems
- Old tanking systems needing replacement
- Crystalline upgrade layer
- Waterproofing prior to plastering or rendering
- Waterproofing prior to tiling
- Waterproofing prior to painting
External & Environmental Applications
- Retaining walls exposed to soil moisture
- Earth-retaining garden structures
- Concrete planters
- Water-exposed masonry
- External concrete walls
- Below-ground garden structures
- Heavy rainfall exposure waterproofing
Civil Engineering & Infrastructure
- Tunnels
- Underpasses
- Culverts
- Drainage channels
- Water management structures
- Concrete chambers
-
Pack Size: 25kg
-
Colours: Grey / White
-
Coverage: 8m² per tub (two coats)
-
Mix Ratio: 3:1 (Powder : Water)
-
Application: Brush / Spray
-
Substrate: Dampened masonry
-
Pressure Rating: Exceeds 7 bar (BS EN 12390‑8)
-
Potable Water: WRAS Listed
-
Certifications: UKAS, WRAS, UKCA
-
Made in: United Kingdom
Technical Benefits
- Permanent Crystalline Waterproofing
- Resists High Hydrostatic Pressure
- Breathable & Non-Toxic Formula
- Self-healing active chemicals
Compliance
Substrates
- Concrete & Pre-cast Units
- Dense Concrete Blocks
- Brickwork & Stone Masonry
- Screeds & Renders
Preparation
- Consult our technical guide for essential surface treatment protocols before application.
Application
- Refer to our installation documents for step-by-step instructions.
- Review equipment checklists to ensure professional-grade results.
Expert Support
Merchants, installers, and specifiers – please get in touch for technical support, full safety datasheets, or stocking enquiries. Our Cornwall-based team provides expert advice for Demanding site conditions.
Technical Line: +44 (0)1872 879011
Enquiries: technical@kaproducts.co.uk